Technical Specifications

Starter Strip Plus Shingle

Starter Strip Plus shingle advantages:

Speeds installation and helps improve safety.

Starter Strip Plus shingle eliminates the need to cut

off tabs or headlap.

Clean look. Starter Strip Plus shingle provides a

machine-cut straight edge at the eave and along the rake.

Saves labor. It’s easy for a single person to position

Starter Strip shingle on the roof.

Maximum compatibility. Extra-wide starter can be

used with any shingle that has an exposure of up to 6".

Improves job quality. Puts the sealant appropriately

at the eaves.

Cost savings. There’s no need to cut down ﬁeld

shingles to use as a starter strip.

Exceptional bonding strength. Continuous sealant

ensures an effective seal between the starter and the

ﬁrst course of shingles.

Goes on right—right away

Introducing the new Owens Corning

™

Starter Strip Plus shingle.

This product eliminates the need for cutting shingle tabs to create a starter row.

3. Once apart, the Starter Strip Plus shingles should be aligned

next to one another with the sealant toward the eave.

1. Starter Strip Plus is packaged two pieces per shingle,

16 shingles per bundle, 100 lineal feet.

2. Perforation down the center allows for

easy separation.

PAGE 1
Starter Strip Plus Shingle Goes on right—right away Introducing the new Owens Corning™ Starter Strip Plus shingle. This product eliminates the need for cutting shingle tabs to create a starter row. 1. S tarter Strip Plus is packaged two pieces per shingle, 16 shingles per bundle, 100 lineal feet. 2. P erforation down the center allows for easy separation. 3. Once apart, the Starter Strip Plus shingles should be aligned next to one another with the sealant toward the eave.
PAGE 2
Application Instructions Owens Corning™ Starter Strip Plus can be used with any shingle that has an exposure of up to 6". Starter Strip shingles cannot be used with Owens Corning™ Berkshire,® Woodmoor® or Woodcrest® shingles. Installation of Starter Strip Plus shingle Starter Strip Plus shingle is designed to be broken into two pieces, and each piece has its own sealant strip. When separated, each starter shingle is 7¾" x 393⁄8", and each bundle will cover approximately 100 lineal feet. See Fig. 1.