Installation Instructions

Starter Strip Plus shingle advantages:

Speeds installation and helps improve safety.

Starter Strip Plus shingle eliminates the need to cut off tabs

or headlap.

Clean look. Starter Strip Plus shingle provides a machine-

cut straight edge at the eave and along the rake.

Saves labor. It’s easy for a single person to position Starter

Strip shingle on the roof.

Compatibility. Extra-wide starter can be used with most

shingles that have an exposure of up to 6" (per Application

Instructions on the reverse side).

Improves job quality. Puts the sealant appropriately at the

eaves.

Cost savings. There’s no need to cut down ﬁ eld shingles to

use as a starter strip.

Exceptional bonding strength. Continuous sealant

ensures an effective seal between the starter and the ﬁ rst

course of shingles.

Convenient. One (1) bundle provides 1 square of material

(105 lineal feet of actual coverage).

Goes on right—right away

Owens Corning™ Starter Strip Plus shingle helps save time by eliminating the need for cutting shingle tabs to create a starter

row. It’s a component of the Owens Corning™ Total Protection Rooﬁ ng System™^.

3. Once apart, the Starter Strip Plus shingles should be aligned next to

one another with the sealant toward the eave.

1. Starter Strip Plus is packaged two pieces per shingle,

16 shingles per bundle, 105 lineal feet.

2. Perforation down the center allows for easy

separation.

Starter Strip Plus Shingle

Starter Strip Plus Shingles are a component of the Owens Corning™ Total Protection Rooﬁ ng System.™

PAGE 1
Starter Strip Plus Shingle Goes on right—right away Owens Corning™ Starter Strip Plus shingle helps save time by eliminating the need for cutting shingle tabs to create a starter row. It’s a component of the Owens Corning™ Total Protection Rooﬁng System™^. 1. Starter Strip Plus is packaged two pieces per shingle, 16 shingles per bundle, 105 lineal feet. 2. Perforation down the center allows for easy separation. 3.
PAGE 2
Application Instructions Owens Corning™ Starter Strip Plus can be used with any shingle that has an exposure of up to 6". Starter Strip shingles cannot be used with Owens Corning™ Berkshire,® Woodmoor,® Woodcrest® or Devonshire™ shingles. Installation of Starter Strip Plus shingle Starter Strip Plus shingle is designed to be broken into two pieces, and each piece has its own sealant strip. When separated, each starter shingle is 7¾" x 393⁄8," and each bundle will cover approximately 105 lineal feet.