Specification

THIS IS NOT A CONSTRUCTION DOCUMENT. Edit carefully to coordinate with specific project requirements.
User must determine suitability of this guide specification in whole or in part for their particular project.
Owens Corning
®
Mineral Wool Insulation
Guide Specification 07 21 00 - 8
13. Published Health Product Declaration (HPD).
B. Product: Thermafiber
®
VersaBoard
®
35, complies with ASTM C612 Type IA, II, III, and IVA.
1. R-Value: 4.2 per inch.
2. Density: 3.5 pcf (actual).
C. Product: Thermafiber
®
VersaBoard
®
40, complies with ASTM C612 Types IA, IB, II, III, and IVA.
1. R-Value: 4.3 per inch.
2. Density: 4.0 pcf (actual).
D. Product: Thermafiber
®
VersaBoard
®
60, complies with ASTM C612 Types IA, IB, II, III, IVA, and IVB.
1. R-Value: 4.3 per inch.
2. Density: 6.0 pcf (actual).
E. Product: Thermafiber
®
VersaBoard
®
80, complies with ASTM C612 Types IA, IB, II, III, IVA, and IVB.
1. R-Value: 4.3 per inch.
2. Density: 8.0 pcf (actual).
2.5 ACOUSTICAL INSULATION FOR FIRE-RATED INTERIOR PARTITION WALLS AND
FLOOR/CEILINGS, UNFACED
A. Product: Thermafiber
®
SAFB™ (Sound Attenuation Fire Blanket)
1. Formaldehyde-Free (FF) Option.
a. GREENGUARD Gold Certified.
b. UL Validated Formaldehyde-Free.
c. Declare and is Living Building Challenge compliant.
2. Density, 1-Inch Thick: 4.0 pcf, nominal.
3. Density, Thicker Than 1 Inch: 2.5 pcf, nominal.
4. This product qualifies under the Department of Homeland Security SAFETY Act designation, which
provides commercial building professions and building owners liability protection in the event of a
domestic act of terrorism.
5. Fiber Type: EPA Choice fiber; minimum 75% pre-consumer recycled content; complies with EPA
Preference Program.
6. Fiber Type: Standard fiber; 70% pre-consumer recycled content.
7. Post-Consumer Recycled Content: 0%.
8. UL
®
Certified Environmental Product Declaration in accordance with ISO 14025.
9. Published Health Product Declaration (HPD).
B. Product: Thermafiber
®
Creased SAFB™ (Sound Attenuation Fire Blanket)
1. Formaldehyde-Free (FF) Option.
a. GREENGUARD Gold Certified.
b. UL Validated Formaldehyde-Free.
c. Declare Label is Living Building Challenge Red-list Approved.
2. Density: 2.5 pcf, nominal.
3. Surface Burning Characteristics: Tested in accordance with ASTM E84. Unfaced, Flame Spread 0 and
Smoke Developed 0.
4. This product qualifies under the Department of Homeland Security SAFETY Act designation, which
provides commercial building professions and building owners liability protection in the event of a
domestic act of terrorism.