Specification

THIS IS NOT A CONSTRUCTION DOCUMENT. Edit carefully to coordinate with specific project requirements.
User must determine suitability of this guide specification in whole or in part for their particular project.
Owens Corning
®
Mineral Wool Insulation
Guide Specification 07 21 00 - 5
12.
Hardware: RainBarrier
®
Clip, insulation retaining clip, for securing RainBarrier
®
continuous insulation to
exterior substrate; recommended by manufacturer as compatible with multiple types of masonry and
façade tie systems.
13.
Hardware: Impasse® Hangers and Impasse® Locking Washers used to secure RainBarrier® continuous
insulation directly to Z-Furring channels.
C. Product: Thermafiber
®
RainBarrier
®
Dark™ 45, semi-rigid mineral wool insulation board that is water-
repellent, non-combustible per ASTM E136, and meets ASTM C612 Type IVB.
1. R-value: 4.3 per inch.
2. Facing: Black fiberglass facing.
3. Density: 4.5 pcf (actual).
4. Moisture-Resistance: Absorption of less than 0.03% by volume when tested in accordance with ASTM
C1104.
5. Surface Burning Characteristics: Tested in accordance with ASTM E84. Black fiberglass faced: Flame
Spread 25 and Smoke Developed 15.
6. Fiber Type: EPA Choice fiber; minimum 75% pre-consumer recycled content; complies with EPA
Preference Program.
7. Fiber Type: Standard fiber; 70% pre-consumer recycled content.
8. Post-Consumer Recycled Content: 0%.
9. UL
®
Certified Environmental Product Declaration (EPD) in accordance with ISO 14025.
10. Published Health Product Declaration (HPD).
11. Declare Label is Living Building Challenge Red-list Approved.
12.
Hardware: RainBarrier
®
Clip, insulation retaining clip, for securing RainBarrier
®
continuous insulation to
exterior substrate; recommended by manufacturer as compatible with multiple types of masonry and
façade tie systems.
13.
Hardware: Impasse® Hangers and Impasse® Locking Washers used to secure RainBarrier® continuous
insulation directly to Z-Furring channels.
D. Product: Thermafiber
®
RainBarrier
®
Dark™ HD, semi-rigid mineral wool insulation board that is water-
repellent, non-combustible per ASTM E136, and meets ASTM C612 Type IVB.
1. R-value: 4.3 per inch.
2. Facing: Black fiberglass facing.
3. Density: 6.0 pcf (actual).
4. Moisture-Resistance: Absorption of less than 0.03% by volume when tested in accordance with ASTM
C1104.
5. Surface Burning Characteristics: Tested in accordance with ASTM E84. Black fiberglass faced: Flame
Spread 25 and Smoke Developed 15.
6. Fiber Type: EPA Choice fiber; minimum 75% pre-consumer recycled content; complies with EPA
Preference Program.
7. Fiber Type: Standard fiber; 70% pre-consumer recycled content.
8. Post-Consumer Recycled Content: 0%.
9. UL
®
Certified Environmental Product Declaration (EPD) in accordance with ISO 14025.
10. Published Health Product Declaration (HPD).
11. Declare Label is Living Building Challenge Red-list Approved.
12.
Hardware: RainBarrier
®
Clip, insulation retaining clip, for securing RainBarrier
®
continuous insulation to