Specification

THIS IS NOT A CONSTRUCTION DOCUMENT. Edit carefully to coordinate with specific project requirements.
User must determine suitability of this guide specification in whole or in part for their particular project.
Owens Corning
®
Mineral Wool Insulation
Guide Specification 07 21 00 - 3
6. Surface Burning Characteristics: Tested in accordance with ASTM E84. Unfaced, maximum Flame
Spread 0 and Smoke Developed 0; Foil-Faced, maximum Flame Spread 25 and Smoke Developed 0.
7. Fiber Type: EPA Choice fiber; minimum 75% pre-consumer recycled content; complies with EPA
Preference Program.
8. Fiber Type: Standard fiber; 70% pre-consumer recycled content.
9. Post-Consumer Recycled Content: 0%.
10. UL
®
Certified Environmental Product Declaration (EPD) in accordance with ISO 14025.
11. Published Health Product Declaration (HPD).
12. This product qualifies under the Department of Homeland Security SAFETY Act designation, which
provides commercial building professions and building owners liability protection in the event of a
domestic act of terrorism.
C. Product: Thermafiber
®
Fire & Sound Guard
®
Plus batt insulation.*
1. Formaldehyde-Free (FF) Option.
a. GREENGUARD Gold Certified.
b. UL Validated Formaldehyde-Free.
c. Declare Label is Living Building Challenge Red-list Approved.
2. Facing: Unfaced
3. R-Value: R-10, R-13, R-15, R-21, R-23, R-24, R30 as applicable.
4. Surface Burning Characteristics: Tested in accordance with ASTM E84; Flame Spread 0 and Smoke
Developed 0.
5. Fiber Type: EPA Choice fiber; minimum 75% pre-consumer recycled content; complies with EPA
Preference Program.
6. Fiber Type: Standard fiber; 70% pre-consumer recycled content.
7. Post-Consumer Recycled Content: 0%.
8. UL
®
Certified Environmental Product Declaration (EPD) in accordance with ISO 14025.
9. Published Health Product Declaration (HPD).
*Thermafiber
®
Fire & Sound Guard
®
Plus replaced Thermafiber
®
UltraBatt
™
and Thermafiber
®
Fire &
Sound Guard
®
D. Product: Thermafiber
®
SAFB
™
(Sound Attenuation Fire Blanket); unfaced.
1. Formaldehyde-Free (FF) Option.
a. GREENGUARD Gold Certified.
b. UL Validated Formaldehyde-Free.
c. Declare Label is Living Building Challenge Red-list Approved.
2. Density, 1-Inch Thick: 4 pcf nominal.
3. Density, Greater Than 1-Inch Thick: 2.5 pcf, nominal.
4. This product qualifies under the Department of Homeland Security SAFETY Act designation, which
provides commercial building professions and building owners liability protection in the event of a
domestic act of terrorism.
5. Surface Burning Characteristics: Tested in accordance with ASTM E84. Unfaced: Flame Spread 0 and
Smoke Developed 0
6. Corrosivity: Non-corrosive, when tested in accordance with ASTM C665.
7. Fiber Type: EPA Choice fiber; minimum 75% pre-consumer recycled content; complies with EPA
Preference Program.