Specification
THIS IS NOT A CONSTRUCTION DOCUMENT. Edit carefully to coordinate with specific project requirements.
User must determine suitability of this guide specification in whole or in part for their particular project.
Owens Corning
®
Mineral Wool Insulation
Guide Specification 07 21 00 - 7
water-repellent, non-combustible per ASTM E136, and meets ASTM C 612 Type IVB.
1.
R-Value: 4.2 per inch.
2.
Facing: Unfaced.
3.
Compressive Strength: 1,296 lbs./ft
2
at 10% compression.
4.
Moisture-Resistance: Absorption of less than 0.05% by volume when tested in accordance with ASTM
C1104.
5.
Surface Burning Characteristics: Tested in accordance with ASTM E84, Unfaced Flame Spread 0 and
Smoke Developed 0.
6.
Surface Burning Characteristics: Tested in accordance with CAN/ULC S102, Unfaced Flame Spread 0
and Smoke Developed 5.
7.
Corrosivity: Non-corrosive, when tested in accordance with ASTM C665.
8.
Fiber Type: EPA Choice fiber; minimum 75% pre-consumer recycled content; complies with EPA
Preference Program.
9.
Fiber Type: Standard fiber; 70% pre-consumer recycled content.
10.
Post-Consumer Recycled Content: 0%.
11.
UL
®
Certified Environmental Product Declaration (EPD) in accordance with ISO 14025.
12.
Published Health Product Declaration (HPD).
13.
Declare Label is Living Building Challenge Red-list Approved.
14.
Hardware: RainBarrier
®
Clip, insulation retaining clip, for securing RainBarrier
®
continuous insulation to
exterior substrate; recommended by manufacturer as compatible with multiple types of masonry and
façade tie systems.
15.
Hardware: Impasse® Hangers and Impasse® Locking Washers used to secure RainBarrier® continuous
insulation directly to Z-Furring channels.
2.4 MULTI-PURPOSE THERMAL AND ACOUSTICAL INSULATION PRODUCT USED WHERE FIRE-
RATED ASSEMBLY IS NOT REQUIRED
A.
Product: Thermafiber
®
VersaBoard
®
, semi-rigid mineral wool insulation board that is water-repellent and
non-combustible as tested to ASTM E136.
1.
Facing: Unfaced.
2.
Facing: ASJ facing.
3.
Facing: Black mat.
4.
Facing: Aluminum FSP
5.
Facing: White Aluminum FSP
6.
Surface Burning Characteristics: Tested in accordance with ASTM E84. Unfaced, Flame Spread 0 and
Smoke Developed 0. FSP, Flame Spread 25 and Smoke Developed 0.
7.
Moisture-Resistance: Absorption of less than 0.03% by volume, when tested in accordance with ASTM
C1104.
8.
Corrosivity: Non-corrosive, when tested in accordance with ASTM C665.
9.
Fiber Type: EPA Choice fiber; minimum 75% pre-consumer recycled content; complies with EPA
Preference Program.
10.
Fiber Type: Standard fiber; 70% pre-consumer recycled content.
11.
Post-Consumer Recycled Content: 0%.
12.
UL
®
Certified Environmental Product Declaration (EPD) in accordance with ISO 14025.