Specification

THIS IS NOT A CONSTRUCTION DOCUMENT. Edit carefully to coordinate with specific project requirements.
User must determine suitability of this guide specification in whole or in part for their particular project.
Owens Corning
®
Mineral Wool Insulation
Guide Specification 07 21 00 - 6
exterior substrate; recommended by manufacturer as compatible with multiple types of masonry and
façade tie systems.
13.
Hardware: Impasse® Hangers and Impasse® Locking Washers used to secure RainBarrier® continuous
insulation directly to Z-Furring channels.
E. Product: Thermafiber
®
RainBarrier
®
ci High Compressive (80), rigid, high-compressive strength board that is
water -repellent, non-combustible per ASTM E136, and meets ASTM C 612 Type IVB.
1. R-Value: 4.2 per inch.
2. Facing: Unfaced.
3. Compressive Strength: 475 lbs./sq.ft. at 10% compression.
4. Moisture-Resistance: Absorption of less than 0.05% by volume when tested in accordance with ASTM
C1104.
5. Fiber Type: EPA Choice fiber; minimum 75% pre-consumer recycled content; complies with EPA
Preference Program.
6. Fiber Type: Standard fiber; 70% pre-consumer recycled content.
7. Post-Consumer Recycled Content: 0%.
8. UL
®
Certified Environmental Product Declaration (EPD) in accordance with ISO 14025.
9. Published Health Product Declaration (HPD).
10. Declare Label is Living Building Challenge Red-list Approved.
11.
Hardware: RainBarrier
®
Clip, insulation retaining clip, for securing RainBarrier
®
continuous insulation to
exterior substrate; recommended by manufacturer as compatible with multiple types of masonry and
façade tie systems.
12.
Hardware: Impasse® Hangers and Impasse® Locking Washers used to secure RainBarrier® continuous
insulation directly to Z-Furring channels.
F. Product: Thermafiber
®
RainBarrier
®
ci High Compressive Plus (110), rigid, high-compressive strength board
that is water-repellent, non-combustible per ASTM E136, and meets ASTM C 612 Type IVB.
1. R-value: 4.2 per inch.
2. Facing: Unfaced.
3. Compressive Strength: 720 lbs./sq.ft. at 10% compression.
4. Moisture-Resistance: Absorption of less than 0.05% by volume when tested in accordance with ASTM
C1104.
5. Fiber Type: EPA Choice fiber; minimum 75% pre-consumer recycled content; complies with EPA
Preference Program.
6. Fiber Type: Standard fiber; 70% pre-consumer recycled content.
7. Post-Consumer Recycled Content: 0%.
8. UL
®
Certified Environmental Product Declaration (EPD) in accordance with ISO 14025.
9. Published Health Product Declaration (HPD).
10. Declare Label is Living Building Challenge Red-list Approved.
11.
Hardware: RainBarrier
®
Clip, insulation retaining clip, for securing RainBarrier
®
continuous insulation to
exterior substrate; recommended by manufacturer as compatible with multiple types of masonry and
façade tie systems.
12.
Hardware: Impasse® Hangers and Impasse® Locking Washers used to secure RainBarrier® continuous
insulation directly to Z-Furring channels.
G. Product: Thermafiber
®
RainBarrier
®
ci High Compressive Max, rigid, high-compressive strength board that is