Owner`s manual

Familiarize yourself with the connections on the back of the OWC
Mercury drive - you will need to use these to connect your new drive to your
computer.
Hardware Installation:
To connect the external optical enclosure to your computer, attach the
included USB “Y” cable to the USB mini B port and any of the USB A connectors
to your computer.
Depending on the drive mechanism you installed, and the power of your USB
port, you may need to connect the second USB A connector from the included
USB “Y” cable to another USB port on your computer. This is not the case with
all computers, many provide enough power via a single USB port, so you will
need to determine this on your system.
A second option would be to purchase a separate standalone power supply -
available at http://eshop.macsales.com/search/OWCMOTGPWR
Most customers will not need either the “Y” cable or a standalone power sup-
ply but will be able to use the enclosure with any mini B USB to standard USB
A port.
We hope you enjoy your new external storage device!
Auxiliary Power
USB mini B port