User Manual

OWC MERCURY ON-THE-GO PRO
INTRODUCTION
2
1.5 REAR VIEW
4
1 2
3
1 2
3
1.5.1 Rear Features
1. USB 3.0 port — Attach the included USB 3.0 (Standard-A to Micro-B) cable here.
2. On/o switch — Turn on and off the Mercury On-The-Go Pro here.
3. Power input — Connect the optional 5V power adapter here (sold separately).
4. FireWire 800 ports — Attach the included 9-9 pin FireWire 800 cable to one of
these ports and to your computer. Use the other FireWire 800 port to daisy-chain
other FireWire 800 devices. NOTE: Any device daisy-chained off of the Mercury On-
The-Go Pro must be powered by its own power supply. The Mercury On-The-Go
Pro does not support bus-powering other devices.