User Manual
Mercury Elite Pro mini Introduction
2
1.4 Rear View
The Mercury Elite Pro mini comes in two port congurations:
USB 3.1 Gen 1 / FireWire 800
USB 3.1 Gen 1 / eSATA
1.4.1 Rear Features
1. USB 3.1 Gen 1 port — Attach the included USB 3.1 Gen 1
(Standard-A to Micro-B) cable here.
2. FireWire 800 ports — Attach the included FireWire 800 cable here.
Use the other FireWire 800 port to daisy-chain other FireWire 800
devices. NOTE: Any daisy-chained device must use its own power
supply. The Mercury Elite Pro mini cannot bus-power other devices.
3. eSATA port — Attach the included eSATA cable here. NOTE: The
connector is keyed to use one specic orientation. If the connector
does not go in smoothly, do not force it. Flip it over and re-insert it.
4. ON|OFF switch — Power the Mercury Elite Pro mini on and o here.
5. DC IN — Connect the optional 5V power adapter here (sold
separately).
1
1
2
3
4
4
5
5