20" LCD Display USER MANUAL LC2000

Introduction

1 Introduction

Congratulations on your purchase of the 20-inch LCD display.

Your LCD display is designed to be versatile, ergonomic, and easy to use.

The display is capable of displaying most standard video signals, with VGA

resolution supported up to 1024x768 with a native resolution of 640x480.

A convenient control panel located on the top of the front panel and a handy

remote control allow you to easily adjust display parameters, change chan-

nels, and adjust the volume. The LCD display’s stereo speakers provide full

rich sound and a convenient audio output port lets you connect to an external

audio system.

The LCD display supports VGA, TV (NTSC, PAL, and SECAM), S-Video,

AV, Component, and YPbPr (480i/p & 576i/p) input devices. The Picture in

Picture (PIP) function lets you view two video sources at the same time

while an integrated V-chip allows you to block selected broadcasts.

1.1 Unpacking

After unpacking your LCD display, make sure the following items are

included in the box and are in good condition:

• LCD display (LCD panel and display base)

• AC power cord and 100-240 VAC/60W power adapter

• Remote control (3-volt lithium battery included) (Optional purchas-

ing)

• Cables:

• 15-pin D-sub VGA cable

• RCA video cable (Optional purchasing)

• RCA stereo audio cable (Optional purchasing)

• 3.5 mm stereo audio cable

• AC power cord

• Warranty Card

• Quick Installation Guide

If you find that any of these items are missing or appear damaged, contact

your dealer immediately. Do not throw away the packing materials or ship-

ping carton in case you need to ship or store the LCD display in the future.

ENGLISH