20" LCD Display USER MANUAL LC2000

Adjusting Settings

3.5 Television Settings (Optional)

3.5.1 Setting Channels

When connected to a television

antenna or CATV cable, the LCD

display can automatically scan

for available channels. Before

scanning, make sure you have

selected the correct TV

signal source: air (broadcast)

or CATV (cable TV).

To scan for channels:

1 Press MENU to turn the OSD on.

2 Press VOL+ to switch to the TV menu.

3 Press PRG/CH to select CH-Scan.

4 Press VOL + to begin scanning channels.

5 The screen displays a number incrementing from 1 to 125 (for NTSC

systems in the USA and other countries) as the LCD display scans for

available channels.

6 Scanning is complete when the channel number stops incrementing

(125 for NTSC systems). The channel switches back to the first avail

able channel found.

NOTE:

Several minutes are required for channel scanning to

complete.

CH SCAN

CCD

OFF

CATV

V-CHIP

CATV / AIR

[–]

CH ADD/DEL

ENGLISH