20" LCD Display USER MANUAL LC2000

Getting to Know Your LCD Display

ENGLISH

2.7 Built-in Speakers

The LCD display comes with a pair of built-in stereo speakers located at the

front of the unit.

2.8 Connecting the AC Power Adapter

You must use the 100-240 VAC/60W power adapter that is included with the

LCD display.

Caution:

• Make sure you have read and understood the safety

notes before connecting the LCD display to the power

adapter and electrical outlet.

• Do not use any other AC power adapter except the

adapter that was included with your LCD display.

• Contact your dealer if you need a replacement adapter.

1 Connect the power cord to the AC

adapter.

2 Plug the power cord into an electrical

outlet. Contact your dealer or a quali

fied service technician if the plug

does not fit into the outlet.

3 Insert the small end of the adapter

cord into the DC-in connector at the

back of the LCD display. The power

LED on the front panel glows

orange.

2.9 Turning On the LCD Display

1 Press the Power key on the LCD display control panel or remote

control to turn the LCD display on. The power LED on the front

panel glows green.

2 Press either Power key again to turn the LCD display off. The power

LED on the front panel glows orange.