20" LCD Display USER MANUAL LC2000

Getting to Know Your LCD Display
7
2.5 Adjusting the Viewing Angle
When used on a desktop or other flat surface, you can tilt
the LCD display back to achieve a more comfortable view-
ing angle.
You can adjust the LCD display viewing angle from an
upright position to a back-tilted angle of up to 7 degrees
and a forward-tilted angle of 4 degrees.
Warning:
Forcing the LCD display past its maximum
extension point will damage the unit.
When tilting the screen, hold the base firmly
and adjust the viewing angle by moving the
top of the display forward or backward. Do
not press the LCD panel when tilting the dis-
play.
2.6 Setting Up the Optional Wall Mount
Purchase a standard wall mount kit (100 mm x 100 mm screw mount area,
minimum 35 kg load-carrying weight) from a third-party vendor if you want
to attach the LCD display to a wall or other fixed surface.
1 Prepare a flat, stable working area with a soft cloth or foam pad to
place the LCD display on.
2 Turn the LCD display
power off, disconnect it
from the power
adapter, and gently lay
the display on its front.
3 Remove the four
screws located at the rear of the LCD display as illustrated. Remove
the LCD display stand.
4 Refer to and follow the instructions included with the wall mount kit
that you purchased.
4ą 7ą
ENGLISH