Operation Manual

8. BACK HOME MODE
Before you start to fly the drone must be calibrated.
During the calibration the device saves the starting (home)
position. Then, once you press the "Back home" button,
the drone starts to fly back towards the starting point
regardless of its current position and location. In order to
abort the "Back home" mode, just move the direction stick.
Note: the drone has NO autoland function. In order to
land it, you need to control the device manually.
9. TAKING PICTURES AND SHOOTING VIDEOS
Press the photo/video button to take a photo.
Press and hold the photo/video button to start recording. Press the photo/video button
again to stop recording.
Use the camera navigation button to change the camera angle.
10. PROPELLER REPLACEMENT
In order to replace the propellers follow the steps shown in the schedule below:
All the pictures and information in the manual have been submitted for illustrative purposes only and are subject to change without prior notice.