Extra Information

Speed modes
The device supports three flight speed modes. Press the flight speed button to switch between slow, normal
and fast mode. The current speed mode is indicated by a number of the beep sounds. Mode 1 - slow mode -
one beep; Mode 2 - normal mode - two beeps; Mode 3 - fast mode - three beeps.
7. HEADLESS MODE
How to turn on/off the headless mode?
Press the controller's button (indicated in the picture). The controller beeps
indicating that the drone is in the HEADLESS mode.
If you want to switch your drone back to the normal control mode, press
the same button again.
In this mode, to make the operation of the drone easier, the forward flight direction is set regardless of
the drone position.
If you want to set the front side of the drone anew, you must turn the device off and configure it again.
8. BACK HOME MODE
Before you start to fly the drone must be calibrated.
During the calibration the device saves the starting (home)
position. Then, once you press the "Back home" button,
the drone starts to fly back towards the starting point
regardless of its current position and location. In order to
abort the "Back home" mode, just move the direction stick.
Note: the drone has NO autoland function. In order to
land it, you need to control the device manually.
9. TAKING PICTURES AND SHOOTING VIDEOS
Press the photo/video button to take a photo.
Press and hold the photo/video button to start recording. Press the photo/video button
again to stop recording.
Use the camera navigation button to change the camera angle.
10. PROPELLER REPLACEMENT
In order to replace the propellers follow the steps shown in the schedule below: