Operation Manual

7. HEADLESS MODE
How to turn on/off the headless mode?
Press the controller's button (indicated in the picture) and hold it for 3
seconds until you hear a beep sound. The controller beeps every 3
seconds indicating that the drone is in the HEADLESS mode.
If you want to switch your drone back to the normal control mode, press
the same button again and hold it for 3 seconds until you hear a beep
sound.
In this mode, to make the operation of the drone easier, the forward flight direction is set regardless of
the drone position.
If you want to set the front side of the drone anew, you must turn the device off and configure it again.
8. BACK HOME MODE
When the drone takes off, the LEDs stop blinking and the
device is saving the flight direction and the starting
position. Then, once you press the "Back home" button,
the drone starts to fly back towards the starting point
regardless of its current position and location. In order to
abort the "Back home" mode, just move the direction stick.
Note: the drone has NO autoland function.
In order to land it, you need to control the device
manually.
Use the
Direction stick
to stop the
„Back Home”
mode.
Back home button
(downward)