Operation Manual

Step 5
Place the drone on a flat and even surface.
Step 6
Move the throttle stick forward, and then backward. The
controller emits the sound indicating that the
connection with the drone has been established. The
LEDs start to glow steadily.
Auto-calibration
Switch the speed mode to "fast" (Mode 3). Place the drone on a flat and even
surface. Move both sticks to the lower left corner positions, as shown in the picture.
Hold these positions for 10 seconds. The drone's LEDs will blink several times, then
they will start to glow steadily. Now, you can release the sticks - the drone is ready to
fly.
6. FLIGHT CONTROL
Flying up / down
Move the throttle stick forward to fly the
drone up.
Move the throttle stick backward to fly the
drone down.
Rotating left/ right
Move the throttle stick left / right to rotate
the drone in a given direction.
Flying left/ right
Move the direction control stick left / right to
fly the drone in a given direction.