Operation Manual

Charger specifications
Input
Charging current
Maximum voltage
5V
0.6A
4.2 ± 0.03V
Battery usage and charge duration reference
Battery type
Battery specification
Single charge
working time
Charging time
Rechargeable lithium
-
polymer battery (Li
-Poly)
7,4V 1200mAh
Drone flight time: up to
10 minutes
About 120 minutes (charging
current approx.
0.6A)
Zinc
-carbon battery
(Non rechargeable)
1.5V
(GP 15G R4P)
Controller (transmitter)
operation time: 18
hours
Non rechargeable (do not
charge)
5. TRANSMITTER AND RECEIVER SYNCHRONIZATION
Step 1
Move the throttle stick to the lowest position.
Step 2
Turn the controller on.
Step 3
Open the battery cover and place the battery in the
drone's battery compartment. Connect the battery
plug to the drone's battery slot and close the cover.
Step 4
Turn your X-
Bee Drone 6.1 on using the switch located
on the back. The LEDs start to blink.