Operation Manual

Auto-calibration
Switch the speed mode to "fast" (Mode 3). Place the drone on a flat and even surface. Move both sticks to the
lower left corner positions, as shown in the picture. Hold these positions for 10 seconds. The drone's LEDs will
blink several times, and then they will start to glow steadily. Now, you can release the sticks - the drone is
ready to fly.
6. FLIGHT CONTROL
Flying up / down
Move the throttle stick forward to fly the drone
up.
Move the throttle stick backward to fly the
drone down.
Rotating left/ right
Move the throttle stick left / right to rotate the
drone in a given direction.
Flying left/ right
Move the direction control stick left / right to fly
the drone in a given direction.
Flying forward and backward
Move the direction control stick forward /
backward to fly the drone in a given direction.