Operation Manual

4. CHARGING THE BATTERIES
Use the included cable to charge
the battery of the drone.
** Use ONLY the supplied USB cord for
charging.
Battery charging should always be done
under adult supervision, and via computer's
USB port only.
LED indicator
Red
- on
Red
- off
Charging...
Charging completed
Charger specifications
Input
Charging current
Maximum voltage
5V
500mAh
4.2 ± 0.03V
Battery usage and charge duration reference
Battery type
Battery specification
Single charge
working time
Charging time
Rechargeable lithium
-
polymer battery (Li
-Poly)
3.7V / 600mAh
Drone flight time: up to
12 minutes
About 90 minutes (charging
current approx.
0.5 A)
Zinc
-carbon battery
(Non
rechargeable)
1.5V
(GP 15G R4P)
Controller (transmitter)
operation time: 18
hours
Non rechargeable (do not
charge)
5. TRANSMITTER AND RECEIVER SYNCHRONIZATION
Step 1
Turn on the drone using the switch located on the back by moving it to "ON" position. Pla
ce the drone on a
flat surface to ensure the gyroscope is centered.
Do not move the drone during the synchronization process.
Step 2
Switch the controller's power button to "ON" position. The LED indicator starts to blink. Wait 5 seconds until
the
synchronization process starts.
Push the throttle stick from the lowest to the highest position, and then push it back to the lowest position.
When the LED indicator stops blinking and starts to glow steadily it means that the synchronization process is
finished.
Step 3
After the flight, move the controller's switch to "OFF" position (the power LED is off). Then, power off the
drone using the same method
- move the power switch located on the back of the drone to "OFF" position.
The lights will go off indi
cating that all the systems are off.
6. FLIGHT CONTROL
Mode
Mode
Left / right
Throttle stick
Ascent / descent,
Rotate left / right
Fly forward / backward
Direction / rotation
control stick
Left
Right
360-degree stunts
When you press the Flip button the controller's red LED indicator starts to blink fast indicating that the drone is
in 3D flip mode.
When in 3D flip mode, move the direction stick forward, backward, left or right to flip the drone in the chosen
direction.
Speed modes
The device supports two flight speed modes. Press the flight speed button to switch between fast and slow
mode. The current speed mode is indicated by the number of beeps (at the moment of switching) and a
corresponding icon on the display ("L" for slow and "H" for fast mode).