User's Manual

RECH ARGEA BLE
LI
-POB
A
TTERY
Battery life
Battery icon will alert for low battery status. When battery reaches 0%
while recording, the camera will save the file and power OFF.
To charge the battery:
1. Connect the camera to a power source.
2. The red status indicator light remains on while the battery is being charged.
3. The red status indicator light turns OFF when the battery is fully charged.
The battery will charge to 100% in 4 hours when using 500mAh USB-
compatible A/ C wall charger. Other chargers may charge at only half this rate.
No damage will occu
r to the camera or the battery if used together prior to full
charge.
To remove the battery:
3. Remove the battery door by placing your thumb in the indentation in the
battery door (on the back of the camera) and sliding it to the left.
4. Allow the door to pop out. Grasp the battery pull-tab and remove from the
camera.
ok
CAUTION
RISK OF EXPLOSION OCCURS IF THE
BATTERY IS REPLACED BY AN
INCORRECT TYPE.
DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.