User's Manual

full or the battery is out of power. Your photos will be saved before the
camera powers off.
Time Lapse
In time lapse mode the camera will take sequentially 1frame per second, 1
frame per 2 seconds, 1 frame per 5 seconds, 1 frame per 10 seconds, 1 frame
per 30 seconds or 1 frame per 60 seconds.
To Start
Press and hold , Menu > Video Setting > Time Lapse
Press the video button
The red status indicator light will flash and there will be clicking
sound while recording. Light flashes each time a photo is taken.
To Stop Press the video button again to stop recording.
When using the Time Lapse, a micro SD card with a Speed Class 10 Rating is
required. To capture a time lapse series, check if the camera is in time lapse
mode.
Self Timer
To Start
Press and hold , Menu > Photo Menu > Self time
Select “OFF” / 3 / 5 / 10 / 30 / 60 second intervals
The camera can be configured to automatically record or take pictures.
Default Settings
The camera powers up with the following default settings:
Video resolution: 1080p / 30fps
Photo resolution: 14.0 Megapixels
(MP) Photo Burst: SINGLE
Wi-Fi: ON
Display: ON
Dat
e & time stamp: OFF