User's Manual

5. Camera on telescopic boom
6. Camera on chest mount
Remarks:
It is the user’s responsibility to secure the camera securely to any sport
equipment. The screws of the mounts have to be retightened from time to
time. The warranty does not cover any damage that may occur during a sport
activity.
INITIAL SETUP
1. Install a micro SD memory card (max up to 32GB work with class 6 or above)
into the camera. Use your fingernail to insert the micro SD card into the slot.
The micro SD card will click into place once it is inserted past flush.
* When
using a micro SD memory card, there should be no data from other
devices. If you are using a micro SD memory card for the first time in the
camera, first you should format the card in your computer.
2. Place battery into the camera.
3. Charging the battery
The lithium-Po battery comes partially charged. To charge it, connect the
included USB cable to the camera and then connect the other end of the
cable to a power source such as AC Charger. No damage will occur to the
camera or battery if used prior to a full charge.