Operation Manual

ManualsBrandsOvermax ManualsBackupCamspot Recorder 2.1

Reverse 5sec

In playback mode, reverse 5sec.

Slow Play

Multiple slow play speeds or normal playback.

Forward

Various forward speeds and normal speed playback.

Stop

■

In normal playback click this button to stop playback.

Play/Pause

1. Go to SEARCH interface;

2. In PTZ channel: ZOOM+;

3. In normal playback click this button to pause playback;

4. In pause mode, click this button to resume playback.

The procedures of controlling multiple DVR by remote control:

The DVR ID default is 8. It’s no need to reset it when control one single DVR by the remote control. If you need

to control multiple DVR, do as below:

First activate the remote control: choose controlled DVR, starts successfully, aim the remote control to control the

hard disk video recorder, press the "Add" button, input device ID) between (1-999), then press ENTER to

determine can control the corresponding number of hard disk video recorder.

4.3

The Mouse

In addition to front panel keys and remote control menu, the user can use a to control. Insert the mouse interface

into the USB interface.

Left Click

Left click to enter the right menu or the main interface.

Left click to access the menu option.

Perform the operations instructions of the control.

Change the state of the checkbox or dynamic detection blocks.

Pop up a drop-down list when left click.

In the state of PTZ 3D control, left drag the area to achieve regional enlarging or reducing.See details zoom effect

4.1.2 PTZ control section introduction.

Double Click

Double click to play video.

Double click to make the screen full or exit.

Right Click

Right click to pop up the right menu in the real-time monitoring screen.

Exit the current interface without saving.

Turning Wheel

Turn the mouse wheel to change the value in the digital box.

Switch the option of the combination box.

Scroll back and forth to achieve the zoom function of channels and PTZ 3D.

Mouse Move

Select controls of the current coordinates to move.

Mouse Drag

Select area to detect.

Select area to shelter.

Select zooming function of PTZ control.