Operation Manual

router, need to set the appropriate subnet mask and gateway with router.
The detail of DVR network configuration please see[Configuration]→[Network Setting]
Ensure the IP is correct and check whether the DVR is on the network by using the Windows command
“ping”.
8.1.2 The control installation and the user login logout
Users can remote access to DVR by Internet Explorer, assuming you have a correct network configuration.
The following interface will pop up when you access the IP address in Internet Explorer.
Install ActiveX: Right click and choose install. If installation is blocked by Windows, please add the IP as a
trusted site or lower your Internet Explorer security settings to allow this.
The following interface will popup when you input your username, password and click “Login”. Interface like
Diagram 5-3 Web Interface when user login successfully. Click “Exit” to quit.
Will be displayed in Compatibility View option is checked on all websites。