Operation Manual
[IP Permissions] for permission to access the DVR IP rights management. When choosing the white list, the
list indicates that only the IP to connect this DVR. The list of supported 64 IP settings. If the selected item is not
ticked, no restrictions on access to the device's IP.
[Alarm Center] alarm interface for customers to reserve the use of self-development.
[Network transmission capacity]
[Number of network user connections] number of connections: 0-10, if you set o means the network does
not allow users to connect ; the maximum number of connections is 10.
[Number of network Monitoring connections] the number of connections is recommended: 0-32, this need
to tick to start this function. Real-time video over the network for browsing, the number of connections depending
on network bandwidth, the number greater , the larger the network load, will impact of video playback fluency.
[Number of ownload Internet connections] the number of connections to download recommendations: 0-8,
this need to tick to start this function
[Network transmission QoS] smooth network transmission quality priority or image quality priority or
adaptive, depending on the setting, the network adjusts the stream automatically.
7.4.9 Selection
Select the Smart mode of device operation
Select the face or perimeter at in need intelligent channels,.。
Support 1ch. Face detection or 2ch.perimeter intrusion detection
8 WEB
Access
8.1
WEB Operation
8.1.1 Network Connection
7000 series to check network connection by LCD on front panel, “ ” refers connection error;
8000 Series check B-Lamp on front panel, light indicates connection, othervise connection error 。
Set IP, subnet mask and gateway for computer and DVR. Please assign the same segment IP address without