Operation Manual

Network
[PPPOE]Select Enable switch to turn on the PPPOE dial-up service of the device。
Enter ISP（Internet service provider）provide the saving of user, password for PPPoE
Operation：Succeed after dialing，check the [Network Status]IP, then enter the IP address to access the device
after open IE。
[3G]Support 3G card dial-up to provide remote access device features。
[NTP]Select Enable switch to turn on the NTP protocol support, can be with SNTP communication server to
realize automatic calibration function。
Host IP: Enter the IP of NTP service NTP
Port：Supports TCP transport only, port is limited only 123。
Update cycle: interval time is 1 minute or more, the maximum update period is set to 65,535 minutes。
Time zone： London GMT+0 Berlin GMT +1 Cairo GMT +2 Moscow GMT +3 New Delhi GMT +5
Bangkok GMT +7 Hong Kong&Beijing GMT +8 Tokyo GMT +9 Sydney GMT +10 Hawaii GMT-10
Alaska GMT-9 Pacific Time GMT-8 US Mountain Time GMT-7 US Central Time GMT-6 US East Time
GMT-5 Atlantic Time GMT-4 Brazil GMT-3 Atlantic – Central GMT-2。
[FTP]Select the Enable box to make the protocol enable，to enter the FTP settings menu。
Two kinds of FTP upload file types are video files and pictures, set up an FTP server address, port, remote
directories and so on. When remote directory is empty, the system will automatically create a different folder by IP,
time, channel。
User name, password to access the FTP username and password.
Set upload file size, you need to upload the file channel, time, type, etc.
Set upload length which upload to FTP server file length, if less than the set value, the entire video file
upload; If more than the set value, upload take part from the beginning and set the value of consistency, the file
later omitted; setting a value of 0, then upload the entire video file.
Different channels can be set two different time periods, three types of video recording.