Operation Manual

[Network Card Type]LAN 1、2 can be selected by Dual LAN equipment
[DHCP]Automatic search IP function. When you open the DHCP IP / Mask / Gateway cannot be located, if the
current DHCP in effect, the IP / Mask / Gateway DHCP display values obtained can be found in the network state
[IP Address]Use（）or input numbers to modify IP, then set [subnet mask] and [default gateway]for this IP.
[First DNS Server]DNS server IP
[Alternate DNS Server]DNS alternate IP
[Physical Address]physical address of current net port
Advanced
[TCP port]8000 as default, Can set the port according to the actual needs of the user.。
[HTTP port]80 as default。
[UDP port]8001 as default, Can set the port according to the actual needs of the user.。。
[RTP/RPSP port]554 as default。
[UPnP]Protocol can turned on port mapping by the router automatically, when using this feature, make sure UPnP
is enabled on the router function。
[Multicast]Multicast IP address range restrictions in the following figure, the multicast port number is not
restricted。