Operation Manual

area, it cant be detected. Please set the size according to the actual usage scenarios.
[Max] green square means the maximum face detection area. When the face is bigger than the maximum
detection area, it cant be detected. Please set the size according to the actual usage scenarios.
[Resolution] set different analysis resolution according to the front-end highest resolution. For example, if
front-end device supports 1080P, the local device can be set into 1080P, 720P, D1 or CIF resolution.
[Red Square] red square means the detection area, once set, the device only detects this face detection area. False
positives and under reporting can be reduced effectively by setting the detection area.
7.3.2 Perimeter Intrusion detection configuration
No.
Configuration
Description
1
Channel selection
Choose the channel need setting
2
Rule naming
Rule naming and set the rule line color
3
enable
Open/close the current
rule
4
Capture enable
Open/close picture capture function
5
Create/delete
Create new rule/draw new line
6
Linkage setting
Linkage setting of the current rule
7
Arming/disarming
Arming/disarming
setting
8
Direction setting
Detection direction
setting
9
Rules list
Display all the created detection rules