Operation Manual

[Alarm input channel No.]：select a channel
[Enable]：control the open and close of alarm
[Type]：choose Normal open and Normal close
[Process]、[Linkage set]：take 7.2.5 video detection as reference.
Alarm Output
On the real time preview picture, right click and choose [Alarm output], or enter[Main menu]-[Alarm]-[Alarm
output]
[Schedule]Alarm output is controlled by the device’s linkage setting.
[Manual]Alarm output is on and the status is active.
[Stop]Alarm output is off and the status is inactive.
[Status]Current status of alarm output
Note：some models do not have alarm output, please refer to some relative data sheet.