Operation Manual

[Channels Choose]Choose one channel.
[Code Level]H.264
[Resolution]choose main resolution and sub resolution.
[Frame Rate] 1～25FPS/PAL,1～30FPS/NTSC
[Bit Rate Control]Choose CBR or VBR. When choose CBR, bit rate can be set. When choose VBR, image
quality can be set.
[I frame interval]Set interval of adjacent frames. Max is 150.
[Bit Rate]Choose 1280,1536,1792,2048,3072,4096,5120,6144,7168,8192 or set by yourself.
Snapshot
Refer to 7.2.1 about more details.
Network
[Channels Choose]Choose one channel.
[IP Address][Subnet Mask][Gateway]Set IP address, subnet mark and gateway for the device.
[First DNS Server]Set DNS server IP address.
[Alternate DNS Server]Set standby DNS server IP address.
[MAC/Serial] Show MAC address of front device.
Detection
[Channels Choose]Choose one channel.
[Enable]Enable motion detect alarm or not.
[Sensitivity]Set sensitivity level for motion detection.
[Set Area] Set area for motion detection.22*18 area can be set.