Operation Manual

6.3.5 Modify channel configuration
Enter Net channel Management menu.
Click “Edit ” button of device.
Click “OK” button to finish.
6.3.6 Configure Front Device
Basic configuration, encoding configuration, snapshot, network and motion detection of front device can be set in
NVR.
Enter Net Channel Management menu.
Click “Front Set ” button of device.
BASIC
[Channel Choose]Choose a channel.
[Channel Name]Modify current channel name.
[IPC Current Time]Set IPC tine.
[Time Zone]Set time zone.
[Time Sync]Enable IPC time sync with NVR.
Encoding