Operation Manual

6.3.2 Automatically added
No configuration, the device is automatically added.
[Main Menu]→[Configuration]→[NET channel Management]→[Open UPNP]
Note：The device should support UPNP and should be in the same LAN.
6.3.3 Searching Added
Search all the IPC can be added via internet and then choose to add. To do the following.
Enter[NET channel Management]
Click[Filter]to choose protocol
Click[Search]
Click+ to add device or Right click[Add to]choose the channel you want or tick the devices you want to add,then
click[BatchAdd]。
6.3.4 Add Device Manually
Enter Channel Set menu.
[Channels]Choose one channel.
[Protocol]Choose protocol supported by the device.
[IP/ Domain Name] Input front device IP address or domain name.
[Port]Input front device TCP port.
[Username] Input front device username.
[Password] Input front device password.
[Remote Detect]After completing the above settings, click detect button to check connection status.
[Remote Channel]When the front device includes multiple channels, choose one channel for it.
Click “App” button to finish.