Operation Manual

2. How to use the memory card
2.1. Properly insert the TF card into the card holder accorsing to the instructions indicated near the card
holder.
2.2. To remove the TF card, gently press the end of it. Then release the pressing to eject it.
Note: The camera is not equipped with built-in memory. Please insert a memory card before
using. Before using the camera, you must format the memory card on the camera.
3. Startup and shutdown:
3.1 Startup: press the POWER key for 3 seconds. The camera will show a startup screen and enter into
the POWER ON state.
3.2 Shutdown: press the POWER key when the camera is under idle mode to shut it down.