Operation Manual

 FORMATTING THE MicroSD CARD

1. Power the unit on.

2. Press the M button. The Status LCD Display will show .

3. Press the M button again until the Status LCD Display shows .

4. Press the REC button. The Status LCD Display will show .

5. Press the M button. The Status LCD Display will show .

6. Press the REC button. The Status LCD Display will show .

7. Press the M button. The Status LCD Display will show .

8. Press the REC button to format the memory. The Status LCD Display

will show .

9. Press the REC button to exit the menu. The Status LCD Display will

show .

 DEFAULT SETTINGS

1. Power the unit.

2. Press the MENU button. The Status LCD Display will show .

3. Press the MENU button again until the Status LCD Display shows

4. Press the REC button. The Status LCD Display will show .

5. Press the MENU button. The Status LCD Display will show .

6. Press the REC button. The Status LCD Display will show .

7. Press the REC button again. The Status LCD Display will show .

 TRANSFER FILES FROM UNIT TO COMPUTER

There are two ways to transfer your files from the unit to a computer

1. Using a card reader.