Operation Manual

22
 Battery indicator
The camcorder has an internal lithium battery, Please charge the
battery at least 1 hours for first time use.
5. Turns off the camcorder.
6. Connect the USB cable to the camcorder and the computer for
battery charging.
7. When charging , the power indicator light will turn red.
8. Unplug the USB cable.
The camcorder body may be warm after extended use. This is
normal.
 Inserting the Memory Card
This camcorder is not equipped with internal memory. An TFcard
or multimedia card must be inserted for this camcorder to operate.
If a card has not been inserted the camcorder can not record..
1:Turn off the camcorder.
2: Open the rubber cover at the side of camcorder. Find the TF card
slot, and then insert the TF card .
If the memory card has successfully be inserted, you can hear a
clear buzzer.
 How to install mount
There are two kinds of mounts in this camcorder. The operating
steps as follow:
3. Fix the metal screw/fixed cylinder of the mount to the tripod
slot/location hole of the camcorder respectively.
4. Hold the mount and wring the thread to fix the mount .