Use and Care Manual

9
ovente.com
Care & Maintenance
ELECTRICAL REQUIREMENTS
Voltage: 120V
Wattage: 1400W
Hertz: 60Hz
Glass cover
PART CARE NOTE
Wok
Temperature
Controller
Wipe clean with a soapy
sponge
Wipe with a soft, clean cloth
Do not use diluted gasoline or any
chemically treated cloth as it will
damage the glass cover's surface.
Wipe thoroughly with a soft,
clean cloth. For stubborn
grease, use a soapy sponge
(make sure to add a safety
protection below the plate)
Do not use a nylon or metal brush
to clean.
Allow it to cool completely before
cleaning. When cleaning, remember
to cover the socket hole to prevent
water from penetrating it.
Do not clean the inner parts of the
temperature controller to avoid
burns, electric shock or internal
damage.
Before using it for the first time, carefully clean your
wok. To avoid damaging the non-stick coating, do
not use abrasive detergents, brushes with metal or
nylon bristles, or sharp objects such as knives or
spatulas. Always dry thoroughly after cleaning.
Connect the temperature
controller to the base of the
wok. Make sure it is connected
securely. (see Figure 1)
Turn the temperature selector to 0. (see Figure 2)
Connect the plug to a 120V / 60 Hz wall outlet. Do not
use a multiple outlet strip or extension cable.