Use and Care Manual

SPECIAL SAFETY INSTRUCTIONS FOR THE KETTLE

 It is recommended to use filtered or tap water when filling the kettle.

 The water level must be within the MIN and MAX marks.

 Switch off the kettle before removing from the base.

 Always ensure that the lid is tightly closed.

 The base and exterior of the kettle must not become wet.

 Always make sure that the kettle is positioned properly on its power base.

 The kettle will automatically shut off once it reached the designated temperature.

USING THE KETTLE FOR THE FIRST TIME

Before using the kettle for the first time, fill the kettle with cold water and boiled it twice

without any additives.

USING THE KETTLE

1. Slide the lid button to open the kettle (refer to figure 1).

2. Fill the kettle with water up to desired level. Do not overfill to prevent the risk of spillage.

Use the water level indicator inside the kettle to measure the desired amount of water.

3. Put the base on a dry and flat surface.

4. Place the kettle on the base.

5. Connect the kettle to a properly installed 110-120V 50/60Hz socket.

6. Insert the plug to the socket.

ovente.com