Care and maintenance Soin et entretien Clean the outside surface of your shower with mild soap⸠Wipe the entire surface completely dry with a clean soft cloth⸠Do not use any abrasive cleanersⰠwire brushesⰠ as they will scratch and dull the surface and the metal of the product.
Scale removal & Technical data.
User instruction Preparation for installation The tools for installing a shower panel includes the those on the right⸠One person and an assistant are recommended for an easy installation. Silicon is not necessary for installing this shower panel, howeverⰠyou may glue the panel on the wall with silicon. Using the diverter Turn the handle counter-clockwise to turn the water on⸠There are 4 functions: Level Hacksaw Safety Glasses Pipe wrench (12✧) Tubing Cutter 1.
Pressure balance faucet
Connect the supplied 3ft 3/8” Comp x ½"Comp hose and tighten the female adapters to the threads (figure 8) then tighten down with pliers⸠ (8) Hanging the Body Shower: Before installing the anchors place a piece of painters tape over the spot 9 (9) where you’ll be drilling the hole. This helps prevent damage to the tile. Using your drill with a tile bit drill the hole into the tile (10) Apply silicone caulk to the anchor for a good seal Follow the manufacturers instructions when installing anchors.
