Installation Guide

1. Ensure the base and walls are leveled. Place the metal track (B) approximately 30mm (1-1/4in) from the

edge of the base to the center of the metal track. Ensure the metal track (B) is leveled, then mark the holes

clearly on the wall.

2.RemovetrackanddrillpilotholesinthemarkedlocationswithaΦ8mm(5/16in)drillbit.

3.Insertthewallanchors(AA)usingarubbermalletuntilthewallanchorsareushwiththewall.

4. Replace and secure the metal track (B) with screws (BB). Do not overtighten.

WALL TRACK INSTALLATION

Φ8mm

5/16in

Helpful Hint

Do not overtighten!

This may crack the

acrylic or tile walls.

Helpful Hint

Make sure there

is a support stud

located behind the

drywall, behind the

tracks!

30mm

1 1/4in