Installation Guide

• This instruction is drawn up for an opening from right to left (see illustration A).

• For an installation from left to right (see illustration B), use the same instructions, but switch around the

panels:mirroreect.

SHOWER REVERSIBILITY

A B

WALL TO WALL MEASURES

• Measure the thickness of your tiles on either side before installing the metal tracks. A thicker tile will limit

your space to install the shower panels.

• Make sure to have a tile to tile distance (D) between 1143mm (45 in) min. and 1206mm (47 1/2 in) max.

(see image).

Make sure to have a distance (D) from the left side tile to the

right side tile:

D Min: 1143mm (45 in)

D Max: 1206mm (47 1/2 in)

Install the shower head on the door’s side! This will reduce the risk of leaking.

If D < 1173mm (46 3/16 in) you can cut the support bar to

adequate size. Only cut the side with no holes!