User's Manual

O V L o o p , I n c . P r o p r i e t a r y a n d C o n f i d e n t i a l I n f o r m a t i o n P a g e 2 | 5
Introduction
The OV Valet™ TPD is a Token Payment Device key fob; it supports MST (Mag Stripe
Reader) and NFC (Near Field Communications) technologies for payment and is controlled
by a companion app (aka OV Loop) over a Bluetooth Low Energy connection. The
application will be downloaded from the iOS AppStore or Google Play Store, create an
account, connect the OV Valet™ TPD with your phone, load your credit and debit cards,
and start making payment with your OV Valet™ TPD in the stores by holding your device
close to the payment terminal reader and pressing the device button to make payment.
Packaging List
1. OV Valet™ TPD
2. Lobster Key Ring
3. Micro-USB cable
Battery Safety Instructions
Operation temperature: 0 - 35˚C.
CAUTION
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
• Battery cannot be subjected to high or low extreme temperatures, low air pressure at
high altitude during use, storage or transportation.
• Replacement of a battery with an incorrect type that can result in an explosion or the
leakage of flammable liquid or gas.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.
Charge your OV Valet™ TPD
1. Plug the micro-USB male in the OV Valet™ TPD connector
2. Plug the USB male in your computer USB or USB power adaptor
3. OV Valet™ TPD is charged when the LED is green