OV Valet™ TPD User Manual O V L o o p , I n c .
Introduction The OV Valet™ TPD is a Token Payment Device key fob; it supports MST (Mag Stripe Reader) and NFC (Near Field Communications) technologies for payment and is controlled by a companion app (aka OV Loop) over a Bluetooth Low Energy connection.
Specifications for Charging Capacity: 165mAh Battery: Li-Polymer Input: 5V/90mA Full-charge time: 2h Cycle life: >100 times Functioning temperature: 0°C ~ +45°C Dimensions: 59 x 37 x 4mm Setup OV Valet™ TPD with OV Loop app 1. Download and install the OV Loop app from the Apple AppStore or Google Play Store 2. Launch the OV Loop app and create a OV Loop account 3. Make sure the OV Valet™ TPD is charged and keep it next to your phone 4.
Security and Precaution 1. Please do not strike the device with any blunt or sharp article. 2. Please use adaptor with output 5.0V/5.5V to charge this device. 3. Please check battery capacity of your device before charging. 4. If no output, just recharge it to go back to normal. 5. Never place the device in the water, close to a fire, or in low or high extreme temperatures. 6. Never let children play with the device, including accessories. 7.
items. FCC-ID: 2AVSI-OVTPD01 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.