UK DE IT FR ES US EU CA C000000 C000000 C000000 C000000 C000000 C000000 INaac008_US_ AB1-007 Assembly video please scan the QR code .
Congratulations! You are the proud owner of a Fish Inn Ice Fishing Shelter. Your Fish Inn is fully assembled and readyto set up on the ice. IMPORTANT: Save these instructions – DO NOT DISCARD. PARTS INCLUDED: · 6 Ice anchors • 2 Tie down straps · Carry and storage bag LONG TERM STORAGE Please make sure your Fish Inn is completely dried out after each use and before storing for long periods of time. Store shelter in a cool, dry place away from rodents.
Setup the Fish Inn 01 02 Lay the ice shelter on the ground and check that there is no material twisted or overlapping the ends of any poles. Tip - Watch for entanglement of poles. DO NOT force shelter when unfolding or folding. Excessive force could cause breakage of poles. Remove ice shelter from the carrying bag. Remove pouch with anchors and straps. Remove tie strap from around theshelter. 03 Pull outward on the loop on one of the walls.
05 on e Find the side of the shelter that faces into the wind and attach the strap provided. Stretch the strap into the wind and with the remaining anchor secure the strap to the ice. Tip - Shovel snow onto the skirt around the entire fishing shelter. D Position the shelter over fishing hole in ice and secure each loop on inside corners/walls of ice shelter to ice using the provided ice anchors. Tip - Push down while twisting ice anchor until it gets started and then twist the anchor until it holds fast.
03 Once the unit is lying flat, lift each of the corners together and stand the folded unit with all of the hubs facing down. Place the shelter into the carrying case hubs first. Place the pouch with the ice anchors and tie down straps into the carrying case as well. e 06 on 05 D Using your hand, push in center hub of roof until the roof flattens down onto the sides. Lay the collapsed shelter down and use the strap to secure all sides.
