Open Frame 21.
Table of Contents About This Guide 2 Introducing the Open Frame 21.5” 2 Important Notices 3 Copyright Information 3 FCC Requirement 4 Safety and Warning Information 5 Package Contents 6 21.
About This Guide Thank you for purchasing an Outform product. We recommend reading this user guide in its entirety in order to maximize the performance and service life of this product. This product is intended for commercial use and should be installed by authorized personnel only. Introducing the Open Frame 21.5” The Open Frame 21.
Important Notices Copyright Information Copyright © 2018 Outform. All rights reserved. All intellectual property rights in this publication are owned by Outform and protected by applicable copyright laws and international treaty provisions. Outform retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by Outform.
FCC Requirement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Safety and Warning Information NOTE This mark is applied to indicate that the equipment conforms to European safety and electro-magnetic compatibility standards. WARNING! Main Supply: This equipment is designed to operate from a 100-240 Volt, 50/60Hz AC power supply. The use of other power sources may damage this equipment. Check that the voltage marked on the rating plate located at the rear of the power adaptor states 100-240V.
Package Contents The package contains the following items: 21.
21.5” Display Exterior Components Top View 1 2 3 4 5 11 6 Left View Right View 7 8 3 9 10 Bottom View No. Description 1 DC in Power Supply Port 2 HDMI OUT Port 3 USB2.0 Host port 4 RJ45 Ethernet Port 5 Photometric sensor 6 Mirco 2.0 OTG Port 7 TF card slot 8 Power button 9 U-BOOT 10 3.
U-disk upgrade SOP Preparation • • • • Blank USB flash drive (FAT32 format) Mini mouse 21.
U-disk upgrade SOP Access the APP Step 1. While the device displaying the APP. Step 2. Go to the back of the device.While the device displaying the APP.
U-disk upgrade SOP Step 3. Plug in the mouse into the USB slot of the device like this. Step 4. While the APP running, double click the right button of the mouse.
U-disk upgrade SOP Step 5. There will popup a dialog like this, and choose ‘launcher3‘ so that you can back to the desktop.
U-disk upgrade SOP Step 6. If you want to back to Sklera APP, please navigate like this.
U-disk upgrade SOP Upgrade the sklera APP Step 1. Create a folder named ‘0’(zero) in your blank USB flash drive on your Windows PC and then Copy the upgrade APP into the ‘0‘ folder, for example like this. Step 2. Eject the USB flash drive safely from your PC.
U-disk upgrade SOP Step 3. Operate the screen using mini mouse and back to desktop of the device base on the above ‘ACCESS THE APP‘ instruction. Step 4. Uninstall the Sklera APP.
U-disk upgrade SOP Step 5. Delete the Sklera APP. PS: Select the Sklera APP and long press the left button of the mini mouse and there’s popup window to select the ‘delete‘ option to delete the APP.
U-disk upgrade SOP Step 6. Plug in the USB flash drive into the USB slot of the device while the PulsePlayer APP running. Step 7. Install the Sklera APP, choose the ‘Replace existing file‘.
U-disk upgrade SOP Step 8. Install process. Step 9. Upgrade process finished, and you can remove the USB flash drive from the USB slot now. This is a video for the whole process for your reference: https://files.outform.
Quick Start User Guide This section describes how to set up and use the 21.5” Open Frame for the first time. Plug in the Open Frame, after a few seconds the video loop starts. The Video loop continues forever unless power to the Open Frame is interrupted. Loading Content onto the Open Frame Insert your Micro Sd card or USB stick into a laptop or P.C, copy the desired content from the laptop/P.C onto the Micro SD card/USB stick. Once copying has finished, eject the SD Card/USB Stick from the P.
For additional assistance, visit outformsupport.com.
