User's Manual

Getting Started

This chapter describes how to set up and start the Media Player.

Setting Up the Android Media Player

To set up the Media Player:

Remove the Media Player from the box.

Connect one side of the power supply to the Media Player socket located on back

of the unit.

Plug the power supply into a standard electrical outlet.

Connect the HDMI cable to the display screen you wish to connect the unit to.

Press the On/O button on the Media Player for approximately seven seconds.

NOTE

Each time the Media Player is powered on (after being o), it may take up to

two minutes to begin to play.

Connect a USB Mouse to the Media Player if you wish to change/adjust the

settings of the Media Player. Once connected, you will see the cursor of the mouse

on the screen.

Logging Out of the Media Player Autoplay Application

The Android Media Player is precongured to automatically start its Autoplay

application when it is turned on. The following describes how to log out of the i

DISPLAY Autoplay application in order to go to a standard Android OS screen.

By default, the Android Media Player is not password protected. You have the

option to disable/enable the requirement to enter a password using the Enable/

Disable Password in order to ensure that only authorized retail personnel can

modify and congure it.