User's Manual

Operating Instructions
Quick Start
Turning On
Plug into electricity or insert fully charged battery.
Display will automatically load movie and play. (If the unit does not play a
movie automatically, press the power button at the back of the display. RED
light indicates standby mode and GREEN light indicates the unit is switched
ON.)
Playing other movies / change content
Connect a USB stick to the unit.
Content from the USB stick will automatically be copied to the unit’s
internal memory.
Once the content has copied successfully, the new content will start
playing automatically.
Remove the USB from the unit.
Important: If you no longer require the old content to be played, you will
need to delete the old content (to explain how this is done see Playlist
section).
Playing content from SD Card
Insert an SD Card to the unit.
The unit will play the content of the SD Card
automatically.
Flash
Activated by touch screen.
Recommended Flash
andscape
Format: SWF (Flash lite 3.1 - mainly supports vector
animation) Resolution: 716x420
Portrait
Format: SWF (Flash lite 3.1 - mainly supports vector
animation) Resolution: 420x716
12
Quick Start
UnRegistered