User's Manual

7
www.i-display.com
1.4 Side B:
1.4.1 SILICON COVER FOR SLOTS: This reduces access to slots or prevent stealing of SD card (if used).
The Silicon cover needs to be open as shown and can be easily removed by just pulling it out. A screw can be
added for extra security.
Diagram 1.4.1 Silicon Cover for Slots
1.4.2 USB SLOT: This is used for connecting flash drives. Once the flash drive is connected, all its content is
automatically copied to the internal memory. Note, deleting content is explained in Section 2.3.1
1.4.3 MINI USB SLOT: This slot is used for connecting to a PC. Once a mini usb is connected to the display and
connected to a PC, the user can change content via the computer. Note, a mini USB is not included in the
package
1.4.4 SD CARD SLOT: Once an SD card is inserted into the unit, the content on the SD card will start to pl ay.
In menu mode, the user will be able to either play content directly from SD card or manually copy its
content to the unit's internal memory. Note, the SD Card is not included in the package.
1.5 Back
1.5.1 DC CONNECTOR: Used to connect the power located at the back of the unit’s leg.