User's Manual

21
www.i-display.com
9. Default settings: Return unit to default settings.
10. Clear internal memory: Erases all content copied from USB or SD to internal memory. It does not
erase content downloaded from the server.
11. Firmware upgrade: Allows upgrading the unit's current firmware. Upgrading can be done via SD card.
First step is to insert the flash disk with the new firmware file. Then choose the firmware upgrade
function in setting. The unit will start upgrading the firmware. IMPORTANT: Do not shut down the
unit while it’s being upgraded or the unit may malfunction.
Electrical Data:
Display: Input: 12 V, 2000mA
Power Adaptor: Input 100-240V, 50/60 Hz, 0.8A; Output 12V, 2000mA
Produced by: Outform Ltd.
For further information or support, please contact: [e-mail]